Detail™ - Aerodynamic and Wood Protection
Detail™ - Aerodynamic and Wood Protection
What's Inside
What's Inside
Montan Oil, Banana Oil, Carnauba Wax, (38% by volume), Propolis (derived from Bees), Glycerol Stearate SE (derived from Glycerin), Cetyl Esters, Lecithin (derived from soybean oil) and FDC Yellow #5.
Aerodynamic body components, cladding, and wood trim are made from materials that need more than paint protection — they need feeding. Zymöl Detail™ is an oil-rich, 38% Yellow Carnauba wax formulated specifically to restore original moisture deep into PVC, polypropylene, fiberglass, polyurethane, ABS, and wood, then seal the surface with a hard-cured, brilliant finish.
Key Benefits
- 38% Yellow Carnauba Wax by volume — one of the highest concentrations available, delivering a hard-cured protective finish with brilliant gloss
- Fresh Banana Oil — a naturally derived oil that penetrates deeply to restore original moisture and flexibility to aerodynamic components and wood trim
- Oil-rich feeding formula — doesn’t just coat the surface, it restores the oils that PVC, polypropylene, and wood lose over time
- Protects flexible body components — formulated for the vinyl-base paints used on aerodynamic panels, cladding, and trim that standard waxes can’t properly protect
- Brilliant glaze finish — leaves a deep, rich shine on treated surfaces
- Factory fresh, hand blended in small batches — never mass produced
- 100% Guaranteed Fresh
How It Works
Aerodynamic body panels, cladding, and wood trim are made from flexible materials — PVC, polypropylene, fiberglass, polyurethane, and ABS — that require a feeding wax rather than a standard paint wax. Detail™ uses Fresh Banana Oil to penetrate deeply and restore the original moisture and flexibility these materials lose to UV exposure and heat, while 38% Yellow Carnauba Wax seals the surface with a hard-cured, protective finish. The result is restored color, protected flexibility, and a brilliant glaze that standard waxes simply can’t deliver on these surfaces.
Directions for Use
Apply Detail™ with a Zymöl Applicator™ using straight, overlapping lines — not circular motions. Allow to rest for 30–60 seconds, then buff to a brilliant finish with a Zymöl Microwipe™. Work one panel at a time for best results.
Technical Specs
- Key ingredients: Fresh Banana Oil, 38% Yellow Carnauba Wax by volume
- Formula: Oil-rich feeding wax with hard-cured finish
- Factory fresh, hand blended in small batches
- Safe for: PVC, Polypropylene, Fiberglass, Polyurethane, ABS, and Wood
Pro Tip
Don’t wait until aerodynamic trim and cladding have faded, cracked, or gone chalky — by then, restoration is much harder. Apply Detail™ twice a year as preventive maintenance and your trim will stay flexible, rich, and protected for years.
Couldn't load pickup availability
Product Instructions
Product Instructions
Remove all dirt and old wax from the aerodynamic surfaces using Zymöl HD-Cleanse™.
Apply Zymöl Detail™ evenly with a dry, clean Zymöl Wax Applicator™ in very small amounts.
For interior application, warm a small amount of Detail in your hand to melt the Carnauba and apply by hand.
Rub the surface with firm, even pressure and let stand for 30 seconds.
Buff gently with a Zymöl Microwipe™ to a dry, brilliant shine.
Turn your Microwipe and wipe slowly to crystalize the wax to a deep shine and let the wax cure for 30-45 minutes.
Size
Size
Item No.102 - 2 ounces - 56g
Did You Know
Did You Know
Detail is perfect for internal and external body components made of PVC, polypropylene, fiberglass, polyurethane, ABS and Wood.
Using fresh Banana Oil and Mixed Plant Tocopherols, Detail enhances the look, feel, and life of flex-agent paints.
Banana oil can prevent the premature aging of almost any surface you apply it to.
Share
